How to Remove a Toggle Bolt?

Removing a toggle bolt can be a daunting task. If you’re not familiar with the process, it’s easy to make a mistake that could damage the bolt or your wall. In this article, we will walk you through the process of removing a toggle bolt step-by-step. We’ll answer some of the most common questions about toggle bolts, and provide some helpful tips on how to remove them without damaging your wall or the bolt itself. Let’s get started!

What is a Toggle Bolt?

Toggle bolts have a long body with a metal wing at one end. The other end of the toggle bolt has threads that screw into the object being mounted.

When the toggle bolt is tightened, the wings open up and wedge against the back of the wall. This gives the toggle bolt exceptional holding power, making it ideal for attaching heavy objects to walls.

Because they are so strong, toggle bolts can be difficult to remove. In this article, we will show you how to remove a toggle bolt without damaging your wall or the bolt itself. Let’s get started! [4]

How do toggle bolts work?

Also called wall anchors, toggle bolts consist of a long metal screw with a toggle head on one end. The other end is typically threaded so that it can be screwed into drywall or another type of wall material.

To install a toggle bolt, you first need to drill a hole in the wall that is slightly bigger than the diameter of the screw. Once the hole is drilled, you then insert the toggle bolt through the hole until the toggle head is on the other side.

Next, you need to pull on the free end of the toggle bolt until the toggle head expands and locks into place. Thetoggle bolt is now secure and can support a weight of up to 50 pounds.

If you ever need to remove a toggle bolt, simply unscrew the metal screw until it is loose enough to be pulled out of the wall. The toggle head will then collapse and can be removed from the hole. [4]

What can toggle bolts be used for?

Toggle bolts are commonly used to hang pictures, mirrors, and shelves on walls. They are also used to secure lights and other fixtures to ceilings. Toggle bolts can be used in both drywall and plaster walls. [4]

Why Do I Need to Remove It?

There are many reasons why you might need to remove your toggle switch. Maybe you’re moving and need to take it with you, or maybe it’s just time for an upgrade. Whatever the reason, removing a toggle bolt is not as difficult as it might seem. Here’s a comprehensive guide on how to do it, with answers to common questions and helpful tips.

First things first, let’s talk about why you might need to remove your toggle switch. There are a few reasons this could be necessary:

• You’re moving: If you’re moving houses or apartments, you’ll probably want to take your toggle switch with you. This way, you can easily install it in your new place without having to buy a new one.
• You’re upgrading: If you’re tired of your old toggle switch, or if it’s just time for an upgrade, removing the old one is the first step.
• You need to access the wires: In some cases, you might need to remove the toggle switch in order to access the wires behind it. This could be necessary if you’re adding a new outlet or light fixture, for example.

How To Remove Toggle Bolts From a Wall

Unscrew the Toggle Bolt

The first step is to unscrew the toggle bolt. This can be done by hand or with a drill, depending on how tight the bolt is.

If the toggle bolt is really stuck, you may need to use a power drill to get it out.

Once the toggle bolt is removed, you can pull the rest of it out of the wall. [1]

Pull It Out

The first step is to try and remove the toggle bolt by simply pulling it out. This can be done by hand or with a pair of pliers. If the toggle bolt is loose, it should come out easily. However, if the toggle bolt is tight, you may need to use a bit more force.

If you are having trouble removing the toggle bolt, you can try using a screwdriver or another tool to loosen it. Once the toggle bolt is loosened, you should be able to pull it out easily. [1]

Cut the Head

One of the first steps in removing a toggle bolt is to cut the head of the bolt off. You can do this with a pair of wire cutters or a hacksaw. Be sure to wear gloves and safety goggles while doing this, as the metal can be sharp.

Once you have cut the head off, use a screwdriver to remove the rest of the toggle bolt from the wall. If there is any residue left behind, you can use a putty knife or another tool to scrape it off. [1]

Hammer It In

The first step is to find a hammer. You will need this in order to drive the toggle bolt into the wall. The head of the bolt should be facing up, and you will want to hold it at a slight angle. Once you have found the perfect spot, start pounding away until the toggle is all the way in.

If you are having trouble getting the toggle bolt started, try using a piece of cardboard or something else that can act as a buffer. This will help to prevent any damage to your walls. [1]

Once the toggle is fully inserted, it’s time to move on to the next step.

Fill in Any Holes

If you’re removing a toggle bolt to fill in the hole it leaves behind, start by doing just that. Get some putty or spackle and fill in the hole until it’s level with the rest of the wall. Once it dries, you can sand it down so that it’s completely smooth.

Now that the hole is taken care of, you can focus on patching up any other damage that was caused by the toggle bolt. If there are any cracks or chips in the drywall around the hole, use putty or spackle to fill them in as well. Once everything is filled in and smoothed out, your wall should look good as new! [1]

How to Remove a Toggle Bolt from Drywall?

Drill out the toggle

Use a power drill and a metal drill bit to drill out the toggle. The goal is to create a hole that is big enough for the head of the bolt to fit through.

Remove the bolt

First, you’ll need to remove the toggle bolt from the wall. To do this, unscrew the nut from the back of the bolt until it’s loose enough to remove by hand. Once the nut is removed, simply pull the toggle bolt out of the wall.

If your toggle bolt is stuck or difficult to remove, you may need to use a screwdriver or other tool to pry it out. Be careful not to damage the wall as you remove the toggle bolt. [2]

Replace the toggle bolt

Now that the old toggle bolt is removed, it’s time to install the new one. Start by drilling a hole in the wall where you want to mount the new toggle bolt. The size of the hole should be slightly larger than the diameter of the toggle bolt itself. [2]

The 5 Quickest Ways to Remove Toggle Bolts from Drywall

Method 1: Using a screwdriver

This is the most common way to remove a toggle bolt. All you need is a screwdriver and patience.

First, unscrew the toggle bolt by turning it counterclockwise. You may need to use a lot of force, so be careful not to strip the head of the bolt.

Once the toggle bolt is loose, pull it out of the wall along with the anchor. If the anchor is stuck, you can use pliers to remove it. [2]

Method 2: Using a hammer and chisel

If the toggle bolt is really stuck, you may need to resort to using a hammer and chisel. First, use the chisel to score around the circumference of the toggle bolt head.

Next, use the hammer to gently tap on the chisel until the head of the toggle bolt pops off. Once the head is removed, you should be able to easily remove the rest of the toggle bolt from the wall. [2]

Method 3: Using a hacksaw

This is probably the quickest and easiest way to remove a toggle bolt, but it will damage the wall. To do this, simply insert the blade of the hacksaw into the hole where the toggle bolt is located. Then, cut through the metal stem of the toggle bolt. Thetoggle bolt should then easily pull out of the wall.

If you’re looking for a more permanent solution, you may want to try one of the other methods listed below. [2]

Method 4: Using a wire cutter

If you don’t have a drill or the other methods aren’t working, you can try using a wire cutter. This method is a bit more difficult, but it’s worth a try if you’re out of options.

First, take the wire cutter and cut through one of the prongs on the toggle bolt. Then, use a pair of pliers to twist and pull the toggle bolt out of the wall. Be careful not to damage the wall while you’re doing this.

If this method doesn’t work, or if you can’t find a wire cutter, you can always call a professional to help you remove the toggle switch. [2]

Method 5: Using a chisel and hammer

This is probably the most difficult method on the list, but it can be effective if done correctly. You’ll need a chisel and hammer for this one.

First, you’ll want to find the head of the toggle bolt. This is usually easy to spot because it’s the only part of the bolt that’s sticking out of the wall.

Once you’ve found the head, place the chisel on top of it. Then, using your hammer, strike the chisel until the head of the toggle bolt comes loose. Be careful not to damage the wall while you’re doing this. [2]

How to Avoid Common Mistakes?

Keep Pressure on the Toggle

As you remove the toggle, it’s important to keep pressure on the back of the wall. This will help to prevent the toggle from spinning in place and making it difficult to remove. [3]

There Is a Plan B

There is always a Plan B when it comes to removing toggle bolts. You can always use a hammer and screwdriver to remove the toggle switch.

Here are the steps:

1. Use a hammer to gently tap on the back of the screwdriver.
2. Apply pressure to the head of the screwdriver with your other hand. The goal is to push the blade of the screwdriver through the center of the toggle switch. As you do this, be sure to keep your fingers away from where the blade will come out.
3. Once the blade is through, twist it slightly so that it catches on to the metal part of the toggle switch.
4. Now, pull on the screwdriver handle while continuing to apply pressure with your other hand. The toggle switch should come out easily. [3]

Match the Screwdriver to the Bolt Head

The first step is to match the screwdriver to the bolt head. If you have a flathead screwdriver, use that. Otherwise, use whatever type of screwdriver fits the head of the toggle bolt.

Once you have the right screwdriver, insert it into the head of the toggle bolt and turn it counterclockwise. The goal here is to loosen the grip of the toggle bolt so you can remove it from the wall.

If the toggle bolt is really stuck, try using a pair of pliers to help loosen it. Just be careful not to damage the wall or break the toggle bolt in half. With enough patience and effort, you should be able to remove the toggle bolt without too much trouble. [3]

Undo Multiple Bolts Evenly

If you need to remove multiple toggle bolts at once, make sure to do so evenly. This will prevent the wall from becoming damaged or uneven. To do this, start by unscrewing one bolt a little bit, then move onto the next one and repeat until all of the bolts are loosened. Once they’re all loose, you can remove them completely.

If you’re having trouble getting the bolts started, try using a drill to get them going. Just be careful not to drill too deeply and damage the wall behind it!

Once the toggle bolts are removed, you can patch up any holes with spackle or putty and repaint as needed. [3]

What to Do if the Toggle Bolt Breaks Off in the Wall?

If the toggle bolt breaks off in the wall, there are a few things you can do. First, try to remove the rest of the toggle bolt from the wall. If this is not possible, you can try to drill a hole through the center of the toggle bolt and use a screwdriver to remove it. Finally, if all else fails, you can always call a professional to help you remove the toggle bolt.

However, they can be difficult to remove, especially if they break off in the wall. If you find yourself in this situation, don’t worry! There are a few things you can do to remove a broken toggle bolt from the wall.

First, try to remove the rest of the toggle bolt from the wall. If this is not possible, you can try to drill a hole through the center of the toggle bolt and use a screwdriver to remove it. Finally, if all else fails, you can always call a professional to help you remove the toggle bolt. [1]

How to install toggle bolts

Installing toggle bolts is a relatively easy process. First, you’ll need to determine the proper placement for the toggle bolt. Once you’ve done that, drill a hole that’s slightly smaller than the diameter of the toggle bolt itself. Next, insert the toggle bolt into the hole and tighten it until it’s snug. Finally, flip the switch on the back of the toggle bolt to lock it in place.

That’s all there is to it! Installing a toggle bolt is a quick and easy way to secure almost anything to your wall. Just be sure to follow all instructions carefully and use caution when working with power tools. [4]

FAQ

How do I know if the hole is bigger than the toggle bolt?

If the hole is bigger than the toggle bolt, the wings will not be able to grip the wall and the bolt will spin without tightening. To avoid this, first determine the size of your hole. If it’s larger than the diameter of the toggle bolt (the threaded part that goes through your drywall), then you’ll need to use a different type of fastener.

There are two ways to do this:

• Use a drill bit that is slightly smaller than the diameter of the toggle. This will allow you to create a tight fit so that the wings can grip properly.
• Or, use a hammer and nail to make your own pilot hole that is slightly smaller than the diameter of the toggle bolt. Be sure to hammer the nail in at an angle so that it doesn’t split the wood.

Can I reuse the toggle bolt?

This is a common question that we get, and the answer is unfortunately, no. The reason being is that when you remove the toggle bolt, the metal wings get bent in the process. This makes it so that the toggle bolt can no longer grip onto the wall as tight as it needs to.

If you are looking to remove a toggle bolt so that you can reuse it elsewhere, we recommend just buying a new one as they are relatively inexpensive. Trying to reuse the old toggle bolt could result in your project not being secure or not turning out how you wanted.

Useful Video: How to Remove a Toggle Bolt Out of Your Wall

Conclusion

We hope this article was helpful in explaining how to remove a toggle bolt. As we mentioned, it is important to be careful when removing the toggle bolt so as not to damage the wall or the object that the toggle bolt is holding in place. If you have any further questions, please feel free to reach out to us and we’ll be happy to help. Thanks for reading!

References

1. https://www.doityourself.com/stry/how-to-remove-toggle-bolts-from-a-wall
2. https://topratedliving.com/how-to-remove-a-toggle-bolt-from-drywall/
3. https://handymansworld.net/how-to-remove-toggle-bolts/
4. https://www.anikasdiylife.com/how-to-install-toggle-bolts/