DeWalt Thickness Planer DW735 Problems

DeWalt Thickness Planer DW735 Problems

Are you looking for reliable answers to common DeWalt Thickness Planer DW735 problems? If so, you’ve come to the right place! This Epic Guide is your ultimate source for finding the solutions to any issues you have with this planner. We’ll discuss every aspect of problem-solving for DeWalt DW735, from diagnosis to troubleshooting tips and techniques. So if you’re struggling with your plan, read on and get ready to become an expert at resolving DeWalt Thickness Planer DW735 issues!

DeWalt Thickness Planer DW735 in General

A Thickness Planer is a machine used for the cutting and sizing of sheet metal, plates, and strips.

It is capable of creating precise cuts with a high level of accuracy. The Thickness Planner consists of several parts, such as an electric motor that powers the cutter head, an adjustable pressure roller to control the thickness of the material being cut, and a feed unit to feed the material into the planner. The planner also contains various tools such as saws and drill bits that are used to create additional finishes or shapes in the material.

DeWalt Thickness Planer DW735 in General

The benefits of using a Thickness Planer include increased speed and accuracy when cutting materials compared to manual methods. This makes it ideal for production runs where precision is necessary. It is also more efficient as it requires little or no extra manpower to operate. The cost of the Thickness Planner is higher than manual methods, but this cost can be offset by its increased productivity and accuracy. Thickness Planers are used in many industries such as automotive, aerospace, and construction.

The Thickness Planner is a valuable tool for any manufacturer who needs precise cuts on sheet metal and other materials with a high level of accuracy. It offers an efficient and cost-effective way to produce quality products at a faster rate. It can be an invaluable addition to any manufacturing process that requires precision cutting of materials.

The DeWalt DW735 Thickness Planer is a powerful and versatile tool designed to provide precise and accurate results. This thickness planer features three knife heads that can plane boards up to 13 inches wide. It also has an infeed and outfeed table for additional support, which helps ensure the highest quality finish. The onboard fan-assisted chip ejection system allows for easy cleanup and eliminates potential hazards from using traditional dust collection systems.

In addition to its power and precision, the DeWalt DW735 Thickness Planer is packed with many other great features such as a two-speed gear box and a quick-change knife system. These features make it the perfect tool for both professional woodworking projects and DIYers alike.

With its many features and capabilities, the DeWalt DW735 Thickness Planer is an ideal choice for any woodworker looking to take their projects to the next level. Whether you’re creating beautiful furniture or flooring surfaces, this planner will help you achieve that perfect finish every time. [1]

DeWalt Thickness Planer DW735 in General

Issues with DeWalt Thickness Planer DW735

While the DeWalt DW735 Thickness Planer is a high-quality tool that offers many great features, it can occasionally experience issues. It’s important to be aware of those issues so that you can troubleshoot them as soon as possible.


Weight is one of the most important factors of a thickness planer. Weight can be defined as ‘the force with which gravity pulls on something’. In other words, it affects how much a product weighs when weighed on a scale.

When using the thickness planner, manufacturers take into account both the weight and volume of all components, including any additional layers such as coatings or adhesives. This ensures that the product is of the correct weight and thickness, as well as meeting any other specific requirements.

The importance of weight in the thickness planner cannot be overstated. By accurately calculating the exact amount of material needed for each component, manufacturers are able to produce high-quality products with consistent specifications – ensuring customer satisfaction as a result. This makes it an essential tool for manufacturers looking to create reliable and efficient goods.

Unfortunately, the DeWalt Thickness Planer is much heavier than manual methods, making it difficult to transport and store. It is recommended that users only move the tool when absolutely necessary, as the weight can cause damage to both the machine itself and any surfaces it’s placed on.

Issues with DeWalt Thickness Planer DW735

Lack of a dust collector

An unfortunate issue with the DeWalt DW735 Thickness Planer is that it does not come with a dust collector.

This means that wood shavings and other debris created during use can become airborne. To prevent this, it’s important to have a proper dust collection system set up in order to safely control the particles created by the planer.

This can be annoying and time-consuming, but is an absolute necessity. Make sure that you have a good dust collection system before using the DW735 to ensure the safety of yourself and anyone in your work area.

Lack of specific incremental depth

One of the most common issues with the DeWalt DW735 Thickness Planer is that it does not offer specific incremental depth settings. This means that when you are planing a board, you cannot choose a set cut depth for each pass. Instead, the cutter head will automatically adjust its cutting depth to match the material being fed into it. This can lead to uneven results and inconsistent finishes on certain projects.

The reduced accuracy may be a deterrent for those looking to create precise
and detailed work, but it can also lend itself to creative projects.
Experimenting with the incremental depths will allow you to explore the range of possibilities available when working with this thickness planer.

Overall, the lack of specific depth settings on the DeWalt DW735 Thickness Planer may not be ideal for everyone. However, it is important to remember that there are still many possibilities when using this tool – especially if you’re willing to get creative!

Blade can randomly stop working

Another of the most common issues reported with the DeWalt DW735 Thickness Planer is that the blades can randomly stop working. This problem is usually caused by a malfunctioning power switch, which has to be replaced in order to get the tool working again. If you find yourself having this issue, it’s best to check the power switch and replace it if necessary.

Another potential cause of blade stoppage could be an electrical issue such as a faulty capacitor or loose wires. It would be wise to check all of your connections for any problems and make sure everything is properly secured before continuing use. Additionally, it’s important to inspect the blades themselves for excessive wear or improper installation as this can lead to unexpected stoppages due to lack of power.

Overheating can also be a factor when the blades stop functioning. If you find that your planer is running too hot, it might be necessary to replace the motor or fan assembly as they can become damaged over time from excessive use. Additionally, make sure to keep your work area well ventilated and free of any debris or dust that could interfere with the tool’s performance.

Blade can randomly stop working

Probably the most annoying issue that can arise with the DeWalt DW735 Thickness Planer is that its knife blades can occasionally stop working. This issue typically occurs when there is a buildup of sawdust debris on the cutting edge of the blade.

To prevent this, it’s important to keep your plan clean and well-maintained. Cleaning should be done regularly to ensure that no dust or dirt accumulates on the blade. Additionally, you should check the blades for sharpness every few weeks, as dull blades can also cause issues with cutting accuracy and performance.

Issues with DeWalt Thickness Planer DW735

If you do find yourself experiencing this issue, there are a few things you can try to get it back up and running again:

  • Make sure all connections are secure and properly connected
  • Clean blade with a brush and compressed air
  • Check the sharpness of the blades and replace them if necessary
  • Check for loose bolts or other parts that could be causing interference
  • Make sure the power switch is functioning correctly.

If these solutions don’t work, it’s possible that your planer needs to be serviced by a professional technician. This will ensure that all parts are in working order and no larger issues exist. If you’re still experiencing issues after this, it may be time to consider replacing your DeWalt DW735 Thickness Planer.

Blades get stuck

Another common problem people may experience with the DeWalt DW735 Thickness Planer is that the blades can get stuck or jammed. This issue usually occurs when the planer has been over-used or if there isn’t enough pressure on the cutting blades. One way to prevent this from happening is to make sure you have a consistent amount of pressure applied to the blade while planning.

If your blades are already stuck, there are several methods you can try in order to loosen them up again:

  • Oil or lubricate the moving parts of your planer
  • Check for any obstruction such as sawdust or debris that could be preventing proper operation
  • Check all nuts and bolts and ensure they are tightened properly
  • Check the sharpness of the blade and replace it if necessary.

If none of these solutions work, it’s possible that your planer needs to be serviced by a professional technician. This will ensure that all parts are in working order and no larger issues exist. If you’re still having trouble after this, it may be time to consider replacing your DeWalt DW735 Thickness Planer.

Machine motor not running well

Last unfortunate but common issue with the DeWalt DW735 Thickness Planer is a motor that does not run as it should. This can be caused by dust and debris clogging the motor or incorrect settings being applied. To fix this, you will need to check the connections on your machine and make sure they are tight and secure. You should also clean out any dust or debris from inside the machine and make sure all of your settings are correct. [2]

Issues with DeWalt Thickness Planer DW735


Are Dewalt 735 planer blades reversible?

Yes, the blades on the DeWalt DW735 planer are reversible. To replace them, you need to remove the top cover of the planer and locate two screws that hold down the cutter head guard. Unscrew these screws and lift off the guard. You can then access three Allen screws which secure each blade in place. Unscrew these and you will be able to take out one blade at a time, flip it over, and re-insert it with new sharp sides facing up. Ensure that all blades are aligned with each other before tightening down again. Once done, put back on the cutter head guard and top cover of your planer and you’re ready to go!

Why is my planner leaving marks?

Your planer may be leaving marks on the wood due to several factors. It is important to know that this issue can be caused by either a dull cutting blade, an improperly adjusted depth of cut, or a clogged dust port.

A dull blade will cause poor cutting results and leave behind raised marks in the wood. To avoid this, you should replace the blades regularly with new ones. If you do not feel comfortable replacing the blades yourself, it is best to have a professional technician do it for you.

The depth of cut can also affect how well your planer cuts and leaves marks on the wood. Generally speaking, you want to adjust the depth so that it is just enough to remove material without going too deep. If the depth is set too deep, it will cause a visible line or mark in your workpiece that cannot be sanded away.

Finally, a clogged dust port could also contribute to raised marks on the wood. To prevent this from happening, make sure you empty and clean out the dust port regularly. Doing so will ensure that no debris gets caught in the blades and causes any problems with cutting performance.

Is Dewalt DW735 made in China?

No, the Dewalt DW735 is not made in China. The thickness planer was designed and manufactured in Taiwan. It is a robust, reliable and well-built planer that performs exceptionally in terms of cutting accuracy and speed.

How do you reduce snipe on Dewalt 735 planer?

Stabilization is a key factor in minimizing snipe on a DeWalt 735 planer. Make sure the planer is sitting level, and that it isn’t moving while running. If your floor is uneven or you’re using it on an outdoor job site, consider setting your planer up on blocks to help keep it steady. In addition, always use a fresh blade in your planer to ensure the smoothest results possible.

You can also reduce snipe by increasing the number of passes the material takes through the machine. This will even out any minor imperfections and should help minimize snipe. Lastly, be sure to properly set your infeed rollers so they are making firm contact with the wood as you feed it through to create consistent pressure as it is cut. This will make a big difference in reducing snipe.

How do you clean the rollers on a Dewalt thickness planer?

Cleaning the rollers on a DeWalt thickness planer is an important part of maintenance for this type of tool. To ensure optimal performance, it’s best to clean the rollers once every month or two. The process is simple and requires only a few supplies, so you can get it done quickly.

First, unplug your DeWalt thickness planer from any power source before beginning the cleaning process. Then, use a vacuum cleaner to remove dust and debris from around the blades and rollers. Be sure to hold the machine securely when vacuuming so that it doesn’t move around.

Next, wipe down all surfaces with a damp cloth or paper towel to remove any remaining dust and debris. Then, use a soft cloth or brush to clean the rollers themselves.

Make sure to move in small circles so that you don’t damage the surface of the rollers.

Finally, apply a lubricant such as WD-40 to all moving parts on the DeWalt thickness planer – including the rollers – to ensure smooth operation. Once applied, wipe away any excess lubricant with a dry cloth and reassemble your machine.

Useful Video: DW735 Planer Deep-Dive Maintenance


DeWalt’s DW735 Thickness Planer is an excellent tool for any woodworking shop. Its powerful motor and durable construction make it a reliable choice for even the most demanding projects. However, like any machine, it may experience problems from time to time. Fortunately, many common issues can be easily resolved with minimal effort. This guide has outlined some basic steps you can take to troubleshoot and repair any DeWalt thickness planer issues in no time. Following these tips should help keep your DW735 running smoothly and efficiently so that you can get back to work creating amazing pieces of woodworking art!

Remember to always consult your user manual before making repairs or modifications to your planer, as improper use could lead to more serious problems. If the issue is too complicated for you to fix on your own, consider consulting a professional who can help you get the job done safely and quickly.

By following these steps, you should be able to keep your DW735 in top condition so that it will last for years of reliable use. With proper maintenance and care, this dependable tool can be an indispensable part of any woodworking shop!

Thank you for reading our guide on DeWalt Thickness Planer DW735 Problems Epic Guide. We hope this article has been helpful in resolving any issues with your planner and that it helps keep your work running smoothly and efficiently! Best of luck with all your future woodworking projects!